ROLLER PRESS MACHINERY
- Details
Introduction
Our rolling machine is a kind of new-type cement grinding equipment developed on the basis of advanced technology, and its grinding system has integrated the rolling, scattering, separating, drying and powder separating into one body. Besides, when used together with a ball mill, it can be used in various process flows, like pre-grinding, mixing, semi-finished grinding, finished grinding, and more. Due to the change in its grinding principles, this rolling machine and its grinding system have more advantages, like 50-100% lower power consumption, and 100-300% higher productivity.
Features
1. Heat overlaying weld has been employed to make the maintenance of wear-resisting layer more convenient. Meanwhile, the amount of microcracks is largely reduced, and the service life of roller surfaces is no less than 8000h. It is quite easy to maintain the roller surfaces.
2. Aeronautic hydraulic technique is used to make the hydraulic system more reliable and stable.
3. With the cooperation of its hydraulic system and automatic control system, it can do the work of load control of main driving motor, deviation control of space between rollers, automatic deviation adjustment, and fault diagnosis.
4. Its matched powder separator has scattering, grading and drying capacity, which makes low operation costs and high working efficiency possible.
Wear resisting liner
There is wear resist liner on the surface of roller, which is hard surfacing to the rollers.
The wearing surfacing can be repaired by hard surfacing. If needed, you can repair the surface without moving rollers.
Technical
Model of roller press PFG
200-180PFG
180-160PFG
180-120PFG
170-100PFG
160-140PFG
150-100Diameter of roller Φ2000 Φ1800 Φ1800 Φ1700 Φ1600 Φ1500 Width of the roller 1800 1600 1200 1000 1400 1000 Width of the roller(m/s) 1.83 1.74 1.75 1.47 1.47 1.50 Normal working distance
between rollers(mm)25-50 25-45 24-45 25-45 25-45 22-40 Maximum feed
partied size (mm)65 65 65 60 60 60 Maximum feed
temperature (℃)≤130 ≤130 ≤130 ≤130 ≤130 ≤130 Grinding
capacityclinker(t/h) 1000-1250 920-1120 650-750 480-620 600-720 460-500 Raw meal(t/h) 1050-1280 920-1150 700-820 500-650 650-760 480-520 Main
motorModel YRKK7104-4 YR6302-4 YR560-4 YR5004-4 YRKK630-6 YR5002-4 Power(kw) 2000×2 1600×2 1250×2 900×2 1120×2 710×2 Rotary speed(r/min) 1000 1490 1480 1485 993 1485 Voltage(v) ~10000 ~10000 ~10000 ~10000 ~10000 ~10000 Model of main motor GYM23PZN GYM2292N GYM18PZN RPG29 GYM18P2N RPG26 Weight (t) 290 250 250 208 212 178 Model of roller press PFG
140-120PFG
140-80PFG
140-70PFG
140-65PFG
120-60PFG
120-50Diameter of roller Φ1400 Φ1400 Φ1400 Φ1400 Φ1200 Φ1200 Width of the roller 1200 850 700 650 600 500 Width of the roller(m/s) 1.52 1.46 1.48 1.48 1.47 1.47 Normal working distance
between rollers(mm)18-35 18-35 18-35 18-35 16-30 16-30 Maximum feed
partied size (mm)60 60 60 60 55 55 Maximum feed
temperature (℃)≤130 ≤130 ≤130 ≤130 ≤130 ≤130 Grinding
capacityclinker(t/h) 460-530 300-350 240-334 240-300 110-165 115-170 Raw meal(t/h) 485-550 320-390 280-360 260-320 175-220 130-195 Main motor Model YR500-4 YR560-6 YR5001-8 YR5001-8 Y355L-6 Y315L-6 Power(kw) 800×2 560×2 500×2 500×2 280×2 250×2 Rotary speed(r/min) 1485 1485 740 740 960 960 Voltage(v) ~10000 ~10000 ~600 ~600 ~380 ~380 Model of main motor RPG28 PRG23 XGL48 XGL48 XGM38 XGL38 Weight (t) 176 125 120 115 68 64
MORE PRODUCTS
Contact Us
Email: sunny62717731@163.com
Fax: +86 513 88380826
Add: Benjia,Ji,North Suburbs of Hai'an County,Jiangsu Province,PRC
底部版权
Copyright © 2020 Jiangsu Pengfei Group. 苏ICP备17020817号
底部版权右
Powered by www.300.cn